Arizona State Boat Flag 12×18 Inch – 200D Nylon Single Sided Reverse Bleed-Through Print – Fade Resistant Nautical Flag with Brass Grommets for Boat, Car & Marine Use

The wood pole is ⅜ inch in diameter — the standard size used by virtually all U.S. desktop flag bases. If you purchased your desk base in the U.S. at any point in the last several decades, it almost certainly has a ⅜-inch socket. If you have an older or non-standard base, check the socket diameter before ordering. The ⅜-inch standard is consistent enough across the market that any recently purchased base should work without any adapter or modification.

This flag is designed for indoor desk display and handheld event use — not for permanent outdoor flying. The 24-inch wood pole is not rated for wind exposure and will warp or split if left outdoors in Arizona's heat and UV. The printed polyester panel is not weatherproofed. For outdoor display, the Arizona 2×3 Ft 200D Nylon Flag is the right choice for apartment balconies and small poles, and the 3×5 Ft 200D Nylon Flag is correct for standard 15–25 ft residential flagpoles — both use brass grommets and UV-rated inks for outdoor use.

Yes. The flag reproduces the official Arizona state flag design: thirteen alternating red and gold rays in the upper half, the copper star at center, and liberty blue in the lower field — accurate to the 1917 Colonel Charles W. Harris design. Colors are matched to official state specifications. The thirteen rays and star proportions are correct at the 12×18 inch format — not simplified or rescaled in a way that alters the design's intended appearance. The copper star is the correct color and position relative to the ray arrangement.

Yes — the 24-inch pole and 12×18 inch flag are the standard format for handheld use at parades, school events, and rallies. The 24-inch length positions the flag at a visible height when held at your side, and the flag is light enough to carry for extended periods without fatigue. The wood pole has a smooth finish that is comfortable in the hand. Many Arizona schools and event organizers use exactly this format — 12×18 on a 24-inch wood pole — for participant distribution at civic events and Arizona-themed activities.

The copper star represents Arizona's identity as the country's leading copper-producing state — a position Arizona has held for well over a century and continues to hold today. Arizona produces more copper than any other U.S. state, and the copper industry was central to the state's economic development following statehood in 1912. The star sits at the exact center of the flag design, at the intersection of the sunburst upper half and the liberty blue lower field, making it the visual anchor of the entire composition. The thirteen sunburst rays that surround it represent the original thirteen colonies — the design connects Arizona's western identity to the broader American story of nationhood.

Keep the flag away from direct sunlight through windows — UV exposure will fade Arizona's reds and golds faster than indoor ambient light. Avoid placing it near heating vents, which cause the polyester to wrinkle and can dry out the wood pole over time. Dust periodically with a soft dry cloth or light compressed air held at a distance. If storing between uses, lay the flag flat or hang it vertically — do not roll the panel tightly around the pole, as this creates creases in the polyester that are difficult to reverse. Under normal indoor display conditions away from direct sun and heat, the colors should remain vivid for years.

Return within 30 days in original, unused condition for a full refund — prepaid return label provided. If your flag arrives with a print defect, a damaged pole, or a sleeve attachment issue, contact us within 30 days for a free replacement — no return shipping required on defective items. Normal aging from extended indoor display — subtle color shift after years of ambient light exposure — is expected product aging and is not a manufacturing defect.