Delaware State Flag 2×3 Ft – Double Sided Reverse Print On Back 200D Nylon – Brass Grommets – Fade Proof Sharp Colors – Indoor/Outdoor Delaware Flag

200D Nylon | Reverse Print on Back | Fade-Proof Inks | Brass Grommets | Canvas Header | Indoor / Outdoor

In Stock
SKU: B0807

$28.75

★ Delaware State Flag · 2×3 Ft Compact · 200D Nylon · Double Sided · Brass Grommets · Fade Proof

Flag Features

Compact flagpole format for Delaware’s rowhouses, beach cottages, and balcony mounts — 200D nylon and brass grommets in Delaware’s coastal salt air and Delmarva wind environment

Compact Format

2×3 Ft — Bracket & Cottage Pole Size

The correct flag for residential flagpoles under 20 feet, porch bracket mounts, and balcony rail hardware. In Wilmington’s rowhouse neighborhoods and Sussex County’s beach communities, the 6–12 foot poles that are standard residential hardware require the 2×3 format. Delaware’s buff diamond at 2-foot hoist is the proportion at which the coat of arms, motto, and 1787 date read correctly from Delaware sidewalk and neighbor viewing distances of 15–25 feet.

Both Faces

Double Sided Reverse Print

Dye-sublimation full-color Delaware flag on the front face and a natural mirror image at identical saturation on the reverse. Standard for single-pole outdoor display. Both faces show Delaware’s complete design — the colonial buff diamond, the coat of arms with farmer and militiaman, the motto, and the 1787 ratification date — at equal color intensity, not a ghost image on the back.

Coastal Rated

200D Nylon — Delmarva Outdoor Standard

200D nylon is non-absorbent in Delaware’s coastal salt air, UV-resistant through the beach season sun load on the Delmarva Peninsula, and light enough to fly in the variable coastal breezes of Sussex County’s ocean and bay fronts. Dye-sublimation color in the fiber maintains Delaware’s colonial buff warmth and colonial blue saturation through the Delmarva outdoor season without the surface fade that defeats polyester alternatives.

Corrosion-Free

Brass Grommets — Salt Air Rated

Brass is the marine-grade grommet standard for coastal flag display because it does not oxidize in salt air. Steel grommets corrode on Delaware’s ocean and bay-front cottage properties within one summer season, leaving rust stains on the flag fabric at the grommet edge. Brass grommets on this flag are compatible with all standard bracket and garden pole snap hooks and will not stain Delaware’s colonial blue nylon across multiple Delmarva seasons.

Delaware

Official Delaware Flag — First State

The 1913 Delaware state flag at 2×3 compact scale — colonial buff diamond on colonial blue, state coat of arms adopted 1777, “Liberty and Independence” motto, and December 7, 1787 ratification date. The flag of the First State at the proportion that fits Delaware’s residential architecture from Wilmington’s rowhouses to Sussex County’s beach cottages to Newark’s university neighborhoods.

Indoor Ready

Indoor Floor Stand Compatible

2×3 is the standard indoor Delaware state flag size for floor-standing display in Delaware courtrooms, corporate conference rooms, government offices, and University of Delaware administrative spaces. At 2×3 on a 6–8 foot ceremonial pole, Delaware’s buff diamond is visible and proportionate for indoor professional display at Delaware institutions throughout Wilmington, Dover, and Newark without dominating the room.

Why Choose Us

The Compact Delaware Flag Built for Delaware’s Rowhouses, Beach Cottages, and Coastal Salt Air

A 3×5 polyester flag with steel grommets on a Wilmington rowhouse bracket is not a cheaper version of this flag — it is a flag that is geometrically oversized for the mount, fades within one Delmarva beach season, and corrodes at the grommets in Delaware’s coastal salt air. The 2×3 double-sided 200D nylon with brass grommets addresses Delaware’s specific residential display context correctly.

200D Nylon Double-Sided 2×3 vs. Generic Polyester for Delaware Residential Display

This Product

2×3 Ft · 200D Nylon · Double Sided · Brass Grommets

  • 2×3 ft — correct proportion for 6–20 ft rowhouse brackets and Sussex County cottage poles
  • Double sided — full Delaware flag at equal saturation on both faces; correct for pole display
  • 200D nylon — non-absorbent; correct for Delaware coastal salt air and Delmarva UV
  • Dye-sublimation — buff warmth and colonial blue hold through beach season UV
  • Brass grommets — no coastal salt air corrosion; no rust staining on colonial blue nylon
  • Indoor/outdoor — Wilmington urban, Sussex County coastal, and Delaware institutional
Generic Polyester Flag

Polyester · Single or Bleed-Through · Steel Grommets

  • Often 3×5 only — oversized for Wilmington rowhouse bracket and Sussex County cottage poles
  • Single-sided or poor bleed — Delaware design faint or absent on reverse face
  • Polyester — UV-degrades faster; surface print fades within one Delmarva beach season
  • Surface print — colonial buff loses warmth and washes to yellow-white within one season
  • Steel grommets — corrode in Delaware coastal salt air; rust stains colonial blue fabric
  • Not rated for Delmarva Peninsula wind cycling on coastal and exposed poles
FeatureThis 2×3 Nylon Double-SidedGeneric Polyester Flag
Size Fit2×3 Ft — Correct for Wilmington Rowhouse and Sussex County Cottage Poles Under 20 Ft3×5 Standard — Oversized for Rowhouse Bracket and Beach Cottage Pole Hardware
Reverse FaceDouble Sided — Full Delaware Flag Both Faces; Buff Diamond at Equal Saturation Front and BackSingle-Sided or Bleed-Through — Delaware Design Faint or Absent on Reverse
Buff Color HoldDye-Sub in Fiber — Colonial Buff Maintains Warm Tone Through Delmarva Beach Season UVSurface Print — Buff Fades to Pale Yellow-White Within One Delaware Coastal Outdoor Season
GrommetsBrass — No Corrosion in Delaware Coastal Salt Air; No Rust Staining on Colonial Blue NylonSteel or Zinc — Corrode in Sussex County and Wilmington Riverfront Salt Air
Coastal Fit200D Nylon — Non-Absorbent; Rated for Delmarva Peninsula Coastal Wind and Salt SprayPolyester Absorbs Salt Spray; Stiffens in Delmarva Wind; UV-Degrades Faster at Beach Exposure
Indoor UseIndoor/Outdoor — Correct for Delaware Courtroom, Office, and Government Floor Stand DisplayPrimarily Outdoor Format — Not Suited to Delaware Institutional Indoor Display

30-Day Satisfaction Guarantee

Return within 30 days for a full refund — no questions asked.

Ships Same Day

Orders before 2 PM EST ship same day — on your Delaware porch bracket this week.

Correct Compact Scale

2×3 is the geometrically correct Delaware flag for Wilmington rowhouses, Sussex County cottage poles, and Delaware balcony bracket hardware.

Official Delaware Design

The 1913 Delaware flag at 2×3 compact scale — colonial buff diamond, First State coat of arms, December 7, 1787 at the proportion Delaware’s residential architecture requires.

Care & Maintenance

Keeping your Delaware 2×3 nylon flag through the Delmarva outdoor seasons

  • Nor’easter & Wind Protocol

    Remove the flag during nor’easter events and sustained winds above 35 mph. Delaware’s Delmarva Peninsula geography — a flat, narrow strip of land with water on three sides — amplifies wind exposure compared to more sheltered inland environments. Nor’easter events tracking up the Mid-Atlantic coast bring Delaware some of the most sustained high-wind conditions on the East Coast, with the Peninsula’s flatness eliminating the topographic shelter that hills and forests provide inland. The National Weather Service office in Mount Holly, NJ issues coastal wind advisories for Delaware — these advisories are the trigger for flag removal on Delmarva coastal properties. For Sussex County beach cottage owners who may not be on-site during off-season Nor’easters, consider bringing the flag inside at the end of each beach season visit rather than leaving it mounted unattended.

  • Washing & Salt Rinse

    Machine wash on a gentle cycle in cold water with mild detergent. Air dry completely. For Sussex County beach cottage flags that are exposed to ocean and bay salt spray through the beach season (Memorial Day through Labor Day), a mid-season salt rinse in July — simply running fresh water over the flag without detergent — reduces salt crystal accumulation in the nylon weave before it becomes abrasive to the dye-sublimation surface layer. At the end of each beach season, a full gentle machine wash before winter storage maintains Delaware’s colonial buff warmth in the print across multiple years of seasonal display.

  • Seasonal Inspection

    Inspect at the start and end of each outdoor season. Check the fly edge for fiber separation, the grommet holes for fabric tearing, and the colonial buff diamond area for any color shift. Delaware’s colonial buff is one of the most UV-sensitive flag colors — the warm tan-gold tone can shift toward a cooler, washed-out yellow when the dye-sublimation layer is degraded by UV over time. A flag on a south-facing Sussex County beach cottage bracket in direct summer sun accumulates UV more rapidly than an identical flag on a north-facing Wilmington rowhouse bracket. The first sign of end-of-life on a Delaware flag is typically buff color shift rather than structural wear. A flag showing buff-to-yellow color shift has reached the end of its accurate color service life and should be replaced.

  • Sussex County Beach Season Storage

    For Delaware beach cottage owners who open the cottage for Memorial Day weekend and close for Columbus Day weekend, the flag lifecycle aligns naturally with the cottage season. Remove and store the flag when closing the cottage for winter — six months of unattended off-season exposure on an empty property removes the wind management protocol that extends flag life. Wash and dry before folding for winter storage. Store flat or rolled (not creased) in the dry interior of the closed cottage. Inspect before remounting at the start of each beach season. With this seasonal management, a 200D nylon brass grommet Delaware flag on a Sussex County beach cottage bracket should deliver 3–5 active beach seasons before buff color accuracy is the replacement driver.


Need the standard residential and commercial flagpole size for a Delaware flagpole over 20 feet? The PromoPatriot Delaware State Flag 3×5 Ft uses the same 200D nylon and brass grommet construction with stitched edges on all four sides — the correct format for 20–40 foot residential and commercial flagpoles throughout Delaware.

Shop Delaware 3×5 Ft Standard Flagpole Flag →
2×3Ft Compact

Correct proportion for Delaware’s 6–20 ft porch bracket, garden, and balcony poles — the format for Wilmington rowhouses, Sussex County beach cottages, and Newark university neighborhoods where the 3×5 standard flag is geometrically oversized

200DNylon

All-season Delmarva Peninsula outdoor standard — non-absorbent in coastal salt air; dye-sublimation color maintains Delaware’s colonial buff warmth and colonial blue saturation through the beach season UV load on Sussex County’s ocean and bay fronts

DoubleSided

Full-color Delaware flag at equal saturation on both faces — colonial buff diamond, coat of arms, motto, and 1787 date correctly oriented on the primary face and mirrored on the reverse for any-direction pole viewing

253Miles

Delaware has 253 miles of tidal shoreline on the Delaware Bay, Atlantic Ocean, and tidal rivers — one of the highest shoreline-to-land-area ratios of any state; the brass grommet and 200D nylon spec is matched to the salt air environment that most Delaware residential flag poles are within seasonal range of

Frequently Asked Questions

Everything you need to know about the PromoPatriot Delaware State Flag 2×3 Ft

The traditional flagpole proportion guideline specifies the flag’s hoist (shorter dimension) should be approximately one-quarter to one-third of the flagpole height. For the 2×3 format with a 2-foot hoist, the strict proportion range is 6–12 feet. In Delaware residential practice, the 2×3 is used on flagpoles up to 20 feet, though it looks proportionately correct at its best on 6–15 foot poles. This is directly relevant to Delaware’s two most common residential flag display contexts: Wilmington rowhouse bracket poles (4–8 feet, where the 2×3 is precisely correct) and Sussex County beach community poles (8–15 feet, where 2×3 is proportionately correct and often the maximum size permitted by community HOA height restrictions). For garden and yard flagpoles of 18–25 feet in Dover, Newark, and Middletown suburban neighborhoods, the 2×3 works at the lower proportion range. For poles over 25 feet, the 3×5 standard format is the correct flag — the 2×3 will look undersized at that pole height from the street.

Delaware’s colonial buff is the most color-sensitive element of any U.S. state flag, and outdoor UV fading of that color specifically undermines Delaware’s flag design in a way that fading does not affect most other state flags. The reason is that buff is a warm neutral — a specific tone of tan-gold that is neither white nor yellow. When buff fades under UV, it doesn’t fade to a slightly lighter version of itself; it shifts from warm tan-gold toward a cooler, washed-out pale yellow or near-white. A Delaware flag where the buff diamond has faded no longer shows the Delaware Regiment’s uniform color — it shows an indistinct light shape against the blue field that could be any flag with a light-colored diamond. The dye-sublimation construction on this flag addresses the buff color stability problem directly: the buff color is driven into the nylon fiber rather than sitting on the surface as a printed layer. Surface-printed buff on polyester fades within one Delaware outdoor season at beach UV exposure levels. Dye-sublimation buff on 200D nylon maintains the warm tan-gold tone through multiple Delaware outdoor seasons. This is the specific reason why this flag’s construction specification matters more for Delaware than for most other states: the flag’s most distinctive visual element — the colonial buff — is also the most UV-sensitive, and maintaining it correctly requires dye-sublimation construction.

Yes, and Sussex County beach community display is one of the primary use cases for this flag. Sussex County’s coastal communities — Rehoboth Beach, Lewes, Dewey Beach, Bethany Beach, South Bethany, Fenwick Island, and the inland beach communities of Long Neck, Millsboro, and Dagsboro — have strong traditions of residential flag display from cottage porch brackets and yard poles. Many Sussex County beach community HOAs have bylaws governing flag display. Delaware state law provides residential property owners with protections for the display of the U.S. flag and Delaware state flag that limit the ability of HOAs to prohibit flag display outright (consistent with the federal Freedom to Display the American Flag Act of 2005, which Delaware’s flag display tradition aligns with). HOAs may impose reasonable restrictions on the manner of display, including pole height, flag size, and bracket location. The 2×3 format on a standard porch bracket or a short 8–12 foot yard pole is within the reasonable display parameters that most Sussex County HOA flag policies accommodate. Verify your specific community’s current flag rules before purchasing if your HOA has a restrictive flag policy, particularly for year-round vs. seasonal display.

You can, but the practical recommendation for unattended beach cottages is seasonal rather than year-round display. The construction — 200D nylon, brass grommets, dye-sublimation color — is fully rated for outdoor exposure through the Delmarva Peninsula’s weather range, including Sussex County’s winter conditions. The issue with year-round unattended display is wind management. Delaware’s Delmarva Peninsula is exposed to nor’easters from October through March that can bring sustained winds of 40–60 mph to the Sussex County coast. A flag left flying on an empty cottage bracket during a nor’easter accumulates fly-edge fatigue from the sustained wind cycling that the same flag would not accumulate if it were removed when the NWS advisory was issued. For seasonal cottage owners who are on-site from May through October and off-site from November through April, the recommended practice is to remove the flag when closing the cottage for winter and remount when opening for the spring. This seasonal management — active outdoor display May–October, stored inside November–April — is the protocol that delivers 3–5 beach seasons of service life from this flag. For year-round Delaware residents in Sussex County’s full-time communities (Lewes, Rehoboth Beach Estates, and the year-round inland Sussex towns) who are present to manage the flag during winter storms, year-round display with consistent nor’easter removal is entirely appropriate.

Return within 30 days in original, unused condition for a full refund — prepaid return label provided. Defects in print quality, nylon construction, or grommet installation replaced free within 30 days — no return required on defective items. Normal wear from Delaware outdoor display — gradual colonial buff color shift from accumulated UV after multiple beach seasons, fly-edge wear from Delmarva wind cycling, minor nylon texture change from salt air cycling — is expected product aging from regular use and not a manufacturing defect. Damage from unmanaged nor’easter exposure or storage in wet or salt-contaminated conditions is not covered under the defect replacement policy.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Delaware State Flag 2×3 Ft – Double Sided Reverse Print On Back 200D Nylon – Brass Grommets – Fade Proof Sharp Colors – Indoor/Outdoor Delaware Flag”

Your email address will not be published. Required fields are marked *

Recently Viewed