Alabama State Flag 2×3 Ft – Double Sided Reverse Print on Back Print 200D Nylon – Brass Grommets – Fade Proof Sharp Colors – Indoor/Outdoor Alabama Flag

200D refers to 200 denier — a measure of fabric thickness and weight. Nylon at 200 denier is significantly stronger than the thin polyester used in budget flags, while remaining lighter than heavier nylon weights. For outdoor flags, nylon has two key advantages over polyester: it dries faster after rain (polyester absorbs more water and stays heavy), and it catches the wind more easily, meaning it flies and ripples beautifully even in a light breeze. The UV-resistant inks applied to 200D nylon also adhere more durably than on cheaper fabrics, resulting in sharper colors that resist fading for longer under sun exposure.

A 2×3 ft flag is the compact standard size, best suited for residential porch flag brackets (the angled mount you attach to your home's exterior), desk flagpole mounts with an adapter sleeve, smaller in-ground flagpoles up to around 10–15 feet, wall-mount display brackets, and indoor display on tabletop or freestanding flag poles. If you have a standard 20–25 ft residential in-ground flagpole, the 3×5 ft is the more commonly recommended size. For anything larger, see our 4×6 ft and 5×8 ft options.

Alabama's state flag features a crimson red saltire — a diagonal St. Andrew's Cross — on a white field. The design was adopted by the Alabama Legislature on February 16, 1895. Alabama state law specifies that the bars of the saltire must be no less than six inches wide. The stark, high-contrast crimson and white design is one of the most visually striking of all 50 U.S. state flags. This flag is printed with accurate crimson red and white in proportions consistent with the official state flag specifications.

Yes — this flag works well for both indoor and outdoor display. Indoors, it's commonly used on tabletop desk flagpoles (with a sleeve adapter), freestanding floor flagpoles in offices or reception areas, wall-mounted display brackets, and framed or pinned wall presentation. The lightweight 200D nylon has a clean, crisp appearance indoors and drapes well when not flying in a breeze. For permanent indoor display where the flag is stationary rather than flying, many customers fold or drape it loosely rather than mounting it on a pole.

Yes. The PromoPatriot Alabama State Flag is available in a full range of sizes for flagpoles of all heights. The 3×5 ft is the most popular size for standard residential in-ground flagpoles (15–25 ft). The 4×6 ft suits larger residential and light commercial poles (25–35 ft). The 5×8 ft is ideal for commercial buildings and taller poles (35–50 ft). We also carry the 6×10 ft and larger sizes for government, institutional, and large commercial installations. All sizes share the same 200D nylon construction, fade-proof inks, and brass grommets.

Machine wash cold on a gentle cycle with mild detergent — no bleach. Tumble dry low or air dry. Take the flag down during severe storms or sustained high winds to reduce stress on the fabric and stitching. When storing between seasons, fold loosely and keep in a cool, dry location away from direct sunlight. Check the edges periodically and trim any loose threads before fraying spreads. The double-stitched edges and UV-resistant inks are designed for long-term durability, but consistent basic care significantly extends the flag's display life.

If you're not 100% satisfied, return your flag within 30 days in original, unused condition for a full refund. We provide a prepaid return label — no questions asked. Every PromoPatriot state flag is also backed by a 6-month warranty against manufacturing defects, so you can order with complete confidence.