Alaska State Flag 4×6 Ft – Double Sided Reverse Print On Back 200D Nylon – Brass Grommets Stitched Edges Fade Proof Sharp Vivid Colors – State of Alaska Flag Banner

The 4×6 is one-third larger in surface area than the 3×5 — 24 square feet vs. 15 square feet. Both flags use the same heavyweight 200D nylon construction, double-sided reverse print, brass grommets, and double-stitched edges. The difference is purely in size and intended pole height. The 4×6 is built for tall institutional and commercial poles (20–35 ft) where a 3×5 would look undersized. The 3×5 is the right choice for residential and light commercial poles in the 15–25 ft range. If you're flying from a standard home flagpole, the 3×5 is almost always the correct size.

Double-sided reverse print means the flag is made from a single layer of nylon with Alaska's official design printed on the front face. The ink saturates through the fabric, producing a natural mirror-image reverse on the back — so both sides show Alaska's gold stars and navy blue in vivid color. The back displays a left-to-right mirror of the front. This is the standard construction for printed nylon flags and is appropriate for all residential, commercial, and government outdoor display. For a true double-sided flag with independently printed panels, an embroidered or sewn-appliqué version is required.

Alaska's state flag features eight gold stars on a midnight navy blue field — seven forming the Big Dipper (Ursa Major) constellation and one larger star representing Polaris, the North Star. The design was created in 1927 by 13-year-old Benny Benson of Seward, Alaska, who won a territorial flag design competition. It was officially adopted when Alaska became a state in 1959 and has not changed since. The North Star symbolizes Alaska as the northernmost U.S. state, and the navy blue represents both the Alaska sky and the forget-me-not, the state flower. The high-contrast gold on navy is especially striking at the scale of a 4×6 flag flying at elevation.

Yes — this flag is rated for both indoor and outdoor use. Indoors, the 4×6 size is well suited for large ceremonial floor stands, arena or gymnasium display, auditorium staging, and wall-mount installations in large public spaces such as government lobbies, courthouses, or convention centers. The brass grommets fit standard indoor pole hardware. For smaller indoor spaces like a classroom or office, the 3×5 ft version is a better fit dimensionally.

The flag has two solid brass grommets set into a reinforced canvas header on the hoist (short) edge. For snap-hook poles, clip the top grommet to the upper snap hook and the bottom grommet to the lower snap hook, then hoist to full staff. For halyard rope poles, thread the rope through both grommets and tie off at the correct height. The reinforced canvas header prevents tearing at the grommet points under the wind load a large 4×6 flag generates at elevation. No tools are required — attachment takes under a minute on any standard pole.

Machine wash cold on a gentle cycle with mild detergent — no bleach. A front-loading washer works best for the larger 4×6 size to prevent tangling. Air dry or tumble dry on low heat. When storing between uses, ensure the flag is fully dry before folding to prevent mildew. Lower the flag during severe storms — the larger 4×6 surface catches considerably more force in extreme conditions than a standard 3×5, and bringing it in during heavy weather will significantly extend its lifespan. Inspect the fly end hem periodically during high-use seasons and trim any loose threads promptly.

Return within 30 days in original, unused condition for a full refund. Prepaid return label provided — no questions asked. Every PromoPatriot flag is backed by a 6-month warranty against manufacturing defects covering the fabric, stitching, grommets, and canvas header.