Back to products

Click to enlarge

★ State of Florida · 6x10 Ft Large Size · 200D Nylon · Brass Grommets · Stitched Edges

Best For: 25-30ft Commercial & Estate Flagpoles · Marinas & Waterfront Properties · Car Dealerships · Schools & Civic Buildings · Large Indoor Wall Display · Bold Florida State Pride

The 6x10 foot PromoPatriot Florida State Flag fills the gap between our 5x8 commercial flag and our 8x12 jumbo format — large enough for serious visibility on a 25-30ft flagpole, while still using brass grommet mounting rather than rope and thimble rigging. Built from heavy-duty 200D nylon with a deeply saturated reverse print, oversized brass grommets, and reinforced stitched edges, this 72x120 inch flag is sized for properties that want a genuinely large flag without stepping up to jumbo-format rigging.

6x10 Ft (72x120") 200D Nylon Reverse Print Brass Grommets Stitched Edges Fade Proof Colors Indoor/Outdoor

Step up to serious scale without stepping into jumbo rigging with the PromoPatriot Florida State Flag in our 6x10 ft (72x120 inch) format — a genuinely large flag that fills the practical gap between a 5x8 commercial flag and our 8x12 jumbo format. At this size, the flag is unmistakably large from the street or driveway, but the fabric area is still light enough to mount with reinforced brass grommets rather than requiring a rope and thimble header, making installation and hardware simpler for properties that don't need true 30-40ft flagpole rigging.

Built from genuine 200 Denier (200D) Nylon, this flag uses a reverse print on the back so the bold red saltire and detailed state seal read correctly on the front while the reverse displays a sharp, saturated mirror image. The single-reverse construction keeps the 72x120 inch canvas light enough to lift cleanly in a moderate Florida breeze rather than hanging heavy and waterlogged the way a double-layer flag of this size would, especially in the humid coastal conditions common throughout the state.

Because a 6x10 flag carries meaningfully more wind load than a 5x8 but doesn't yet require jumbo-format rigging, the header uses oversized solid brass grommets set into a reinforced canvas header, sized to handle the increased halyard tension this scale produces. The edges receive heavy reinforced stitching tuned for the higher wind-whip frequency a flag this size experiences compared to smaller formats, without the full jumbo-grade reinforcement reserved for our 8x12 and larger flags.

Why 6x10 Sits in Its Own Tier Between 5x8 and 8x12

Flag hardware doesn't scale in a straight line — it scales in steps based on the actual wind load a given fabric area generates. A 5x8 flag works well with standard oversized brass grommets. An 8x12 flag generates enough sustained load that rope and thimble rigging becomes the safer, more durable choice. A 6x10 flag sits in the space between: large enough to need genuinely reinforced grommets and heavier stitching than a 5x8, but not yet at the fabric area where grommets become a structural liability the way they would on a true jumbo flag. This makes 6x10 a strong choice for properties that want serious size and visual impact while keeping installation as simple as a standard grommet-and-clip flagpole setup.

Perfect For

25-30 Ft Flagpoles

Proportioned for tall residential estate poles and mid-size commercial flagpoles common to Florida properties.

Marinas & Waterfront

A bold, large-format flag suited to marinas, waterfront estates, and coastal commercial properties throughout Florida.

Dealerships & Commercial Lots

Large enough to stand out on a commercial lot or dealership frontage without requiring jumbo-flag rigging.

Schools & Civic Buildings

A strong, visible presence for school flagpoles, civic centers, and municipal buildings with mid-height poles.

Installing Your 6x10 Ft Flag — 3 Steps

Unpack & Prep

Unfold the flag fully and let it relax before mounting. A steamer works well at this size to remove shipping creases for a crisp display.

Secure to Halyard

Attach the flag using the oversized brass grommets, confirming snap hooks are fully closed given the increased wind load at this size.

Hoist & Check Clearance

Hoist to a 25-30ft pole appropriate for this size, and confirm a wide clearance radius so the flag has room to fly without snagging on nearby structures.

⚠ High Wind & Storm Season Advisory

A 6x10 flag generates considerably more wind load than a 5x8, and Florida's tropical storm and hurricane seasons add real seasonal risk. We recommend lowering this flag during sustained winds above 35 mph and whenever a tropical storm watch or warning is issued for your area, to protect both the flag and the flagpole hardware.

Florida's Flag — The Sunshine State's Design

Florida's state flag features a red saltire (diagonal cross) on a white field, with the state seal centered at the intersection. The design was adopted in 1900, with the red cross added by popular vote that year specifically so the flag would not be mistaken for a plain white flag of surrender or truce when viewed at a distance. The state seal depicts a Seminole woman scattering flowers, a sabal palm tree, a steamboat, and the sun's rays, reflecting Florida's natural and cultural landscape. At 6x10 scale, every detail of the seal and saltire renders with bold, unmistakable clarity.

6x10 Ft (72x120 Inch) Florida State Flag — large format that bridges the gap between 5x8 commercial and 8x12 jumbo sizing.
200D Premium Nylon — durable, weather-resistant fabric built for the increased wind load of large-format flags.
Reverse Print on Back — full dye penetration creates a vivid mirror image while keeping the large canvas lightweight.
Oversized Solid Brass Grommets — reinforced hardware sized for 6x10 wind load without requiring rope and thimble rigging.
Heavy Reinforced Stitched Edges — tuned for the higher wind-whip frequency of large-format flags.
Fade Proof & UV Resistant — sharp red, white, and seal detail colors engineered to resist Florida sun and humidity.
Indoor/Outdoor Versatile — equally effective as a flagpole flag or a large indoor wall and stage backdrop.

Product Name	PromoPatriot Florida State Flag 6x10 Ft — Double Sided Reverse Print, 200D Nylon, Brass Grommets
State	Florida (FL)
Flag Design	Official Florida State Flag — Red Saltire on White Field with Centered State Seal
Dimensions	6x10 Feet (72 x 120 Inches)
Material	Heavy-Duty 200 Denier (200D) Nylon
Print Type	Reverse Print (Reads correctly on front, vivid mirror image on reverse)
Mounting	Heavy-duty canvas header with 2 oversized solid brass grommets
Edge Finishing	Heavy reinforced multi-row lock stitching for large-format wind load
Recommended Pole Height	25-30 Feet (Commercial / Estate Residential)
Primary Use	Marinas, Estate Properties, Commercial Lots, Schools, Civic Buildings, Indoor/Outdoor Display
Brand	PromoPatriot

Standard Shipping

Standard delivery 3–5 business days. Expedited (1–2 days) and overnight options available at checkout. Orders placed before 2 PM EST on weekdays ship same day.
30-Day Hassle-Free Returns

Return within 30 days in unused original condition for a full refund. Prepaid return label provided. Manufacturing defects in nylon, stitching, or grommets replaced free within 30 days.
Quality Guarantee

Every PromoPatriot flag is backed against manufacturing defects in color fastness, fabric construction, and grommet integrity. If something isn't right out of the box, we make it right.

Florida State Flag 6×10 Ft – Double Sided Reverse Print On Back 200D Nylon – Brass Grommets Stitched Edges Fade Proof Sharp Colors – Fade Proof Sharp Colors Indoor/Outdoor State of Florida Large Size Flag

Name: Buy Florida State Flag 6x10 Ft Online – Durable Nylon Flag
SKU: B0917
Price: 179.40 USD
Availability: InStock

SKU: B0917

$179.40

Compare

Add to wishlist

★ Florida State Flag · 6x10 Ft · 200D Nylon · Brass Grommets · Fade Proof

Flag Features

Large-format outdoor flag construction — heavy-duty 200D nylon, deep reverse print, and reinforced brass grommets sized for serious scale without jumbo rigging.

Large Format

6x10 Ft Bridge Size

A bold 72 by 120 inch canvas that bridges the gap between standard commercial flags and jumbo-format flags. Proportioned for 25-30ft poles.

Built For Scale

200D Heavy-Duty Nylon

Reinforced for the increased wind load of large-format flags while staying light enough to fly cleanly in a Florida breeze.

Deep Penetration

Reverse Print on Back

Dye-sublimation bleeds fully through the nylon across the full 72x120" canvas. Correct front read, vivid mirror image on the reverse.

Rust-Proof

Oversized Brass Grommets

Reinforced hardware sized for 6x10 wind load — large enough to need real reinforcement, not yet large enough to need rope and thimble rigging.

Heavy Reinforced

Reinforced Stitched Edges

Tuned for the higher wind-whip frequency of large-format flags, fortifying the fly end against fraying over time.

UV Resistant

Fade Proof Colors

Treated with UV-resistant dyes, Florida's bold red saltire and seal detail stay sharp under intense Florida sun, indoors or out.

Why Choose Us

200D Nylon, Reinforced Brass Grommets, Heavy Stitching — A 6x10 Flag Built for the Gap Between Commercial and Jumbo

Not every property needs jumbo-format rigging, but some need more than a standard 5x8. A 6x10 flag fills that gap deliberately — large enough for genuine visual impact on a 25-30ft pole, while staying within the range where reinforced brass grommets are still the right hardware rather than a compromise.

PromoPatriot 6x10 Large-Format Build vs. Standard Scaled-Up Flags

This Product

6x10 Ft · 200D Nylon · Reinforced Grommets

200D Nylon — reinforced weight built for large-format wind load
Reverse print — vibrant mirror image across the full 72x120" canvas
Oversized brass grommets — sized correctly for 6x10 scale, no rope/thimble needed
Heavy reinforced edges — tuned for large-format wind-whip frequency
Fade proof colors — UV treated dyes hold sharp under Florida sun
Simple installation — standard grommet-and-clip mounting, no special rigging

Standard Scaled-Up Flag

Cheap Polyester · Standard Grommets · Single Stitch

100D/150D Polyester — undersized fabric strength for this scale
Dull back — washed-out reverse side, poor visibility from behind
Undersized grommets — not reinforced for the jump from 5x8 to 6x10
Single stitch — tears under the higher wind-whip frequency at this size
Untreated dyes — fades fast under intense, prolonged Florida sun exposure
Mismatched hardware — grommets too light for the actual fabric area

Feature	PromoPatriot 6x10 Large-Format Flag	Standard Scaled-Up Flag
Material Strength	200D Nylon — Reinforced for Large-Format Load	Thin Polyester — Undersized for This Scale
Wind Performance	Flies cleanly even at 72x120" without sagging	Heavy, waterlogged fabric hangs limp at this size
Color Fastness	UV Resistant Dyes — Sharp Under Florida Sun	Untreated ink fades fast under sustained exposure
Edge Durability	Heavy reinforced stitching for large-format stress	Light stitching tears under increased flag-size stress
Mounting Hardware	Oversized Brass Grommets Sized Correctly for 6x10	Standard-size grommets undersized for true 6x10 load

30-Day Satisfaction

Return within 30 days for a full refund if you aren't completely satisfied.

Fast Dispatch

Orders placed before 2 PM EST ship the very same day.

Fade Proof Guarantee

Our advanced UV resistant dye-sublimation means your Florida flag stays vibrant at large format scale.

Care & Maintenance

Maximizing the lifespan of your 200D Nylon 6x10 Ft flag

Storm Season Takedown

A 6x10 flag presents a meaningfully larger sail area than a 5x8. In sustained winds above 35 mph, or whenever a tropical storm watch or warning is issued in Florida, lower the flag to protect both the fabric and the grommet hardware from excess strain.
Washing & Cleaning

Hand wash in a large basin or outdoors with a hose and mild detergent, then air dry fully before refolding. Never machine wash or dry a flag this size, since the agitation can stress the oversized grommets and canvas header.
Proper Storage

Never fold or store a damp flag, especially in Florida's humid climate where mildew develops quickly. Once fully dry, fold neatly and store in a dark, dry, air-conditioned space away from direct sunlight.
Monitor the Fly End

The fly end takes the most repeated stress at this size. Check it periodically, and if you notice early fraying, trim the loose thread and re-sew the hem to extend the flag's life before a full blowout occurs.

Need a more standard commercial size? Check out our Florida State Flag 5x8 Ft, sized for typical 25-30ft commercial flagpoles with the same premium 200D nylon. For monumental scale and highway visibility, see our Florida State Flag 8x12 Ft jumbo format.

Shop Florida 5x8 Ft Flag →

6x10Feet

A 72x120 inch large-format profile that bridges standard commercial flags and jumbo-format flags, built for 25-30ft poles.

200DNylon

Reinforced 200 Denier nylon engineered for the increased wind load of large-format flags without becoming heavy or waterlogged.

2Oversized Grommets

Reinforced brass hardware sized correctly for 6x10 wind load — large enough to need reinforcement, simple enough to skip rope and thimble rigging.

FadeProof

UV resistant dyes lock in Florida's bold red saltire and seal detail, holding sharp under the state's intense sun.

Frequently Asked Questions

Everything you need to know about the PromoPatriot Florida 6x10 Ft Flag

Why doesn't this flag use rope and thimble like the 8x12 jumbo size?

Flag hardware needs scale with the actual fabric area and wind load a flag generates, not in a straight line with size. At 6x10 feet, this flag carries enough wind load to need genuinely reinforced, oversized brass grommets rather than standard hardware, but not so much that grommets become a structural risk the way they would at our 8x12 jumbo size. Reinforced grommets are the correct, simpler hardware choice at this scale, which also makes installation easier than jumbo-format rope and thimble rigging.

What flagpole height is right for a 6x10 flag?

A 6x10 foot flag is proportioned for flagpoles in the 25 to 30 foot range, consistent with the standard guideline of roughly one-quarter to one-fifth of the pole's height. This makes it a strong fit for tall residential estate poles and mid-size commercial flagpoles. If your pole is shorter than 25 feet, our 5x8 ft Florida flag will likely look more proportionate; if your pole is 30 feet or taller, our 8x12 ft jumbo flag may be a better match.

How is this different from the 5x8 ft Florida flag?

The 6x10 flag has roughly 50% more fabric area than the 5x8, which is a meaningful jump in both visual scale and wind load. To account for that, this flag uses oversized brass grommets and heavier reinforced stitching tuned for the higher wind-whip frequency this size produces. If your flagpole is in the 25-30ft range and you want a noticeably larger, bolder presence than a 5x8 without moving to jumbo-format rigging, the 6x10 is built specifically for that gap.

Is this flag suitable for Florida's storm season?

This flag's 200D nylon, oversized grommets, and reinforced stitching are built for everyday Florida wind conditions and routine high-wind days, but no flag of this size is designed to remain flying through tropical storm or hurricane-force winds. We recommend lowering and securing this flag whenever a tropical storm watch or warning is issued for your area.

What does "Reverse Print on Back" mean?

A reverse print (single-reverse) means the dye fully penetrates the nylon during printing, so the front reads correctly and the back shows a sharp mirror image. At 6x10 scale, this keeps the flag light enough to lift cleanly in a moderate breeze rather than hanging heavy the way a true double-sided flag with a block-out liner would at this size, while still looking vivid and sharp from both directions.

What is your return policy?

You can return the flag within 30 days in original, unused condition for a full refund — a prepaid return label will be provided. If the flag suffers from a manufacturing defect (such as an improperly set grommet, misprinted colors, or unraveled stitching out of the box), we will replace it free of charge within 30 days. Normal outdoor wear and tear — such as fly-end fraying from high winds or color fading over several months of sun exposure — is the expected lifecycle of a large-format outdoor flag and is not covered as a manufacturing defect.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Florida State Flag 6×10 Ft – Double Sided Reverse Print On Back 200D Nylon – Brass Grommets Stitched Edges Fade Proof Sharp Colors – Fade Proof Sharp Colors Indoor/Outdoor State of Florida Large Size Flag”