★ State of Delaware · 12x18 Inch Boat Flag · 200D Nylon · Brass Grommets · Bleed-Through Print

Best For: Boat Rails & Antenna Mounts · Car & Truck Window Flags · Golf Carts & ATVs · Bicycle Flag Poles · Small Indoor Desk Display · Compact Delaware State Pride

The 12x18 inch PromoPatriot Delaware State Flag is our compact nautical and vehicle-format flag, sized for boat rail mounts, car window clips, antenna poles, and small flagstaffs where a full-size flag won't fit. Made from the same durable 200D nylon as our larger flags, it features a single-sided print with a 100% bleed-through reverse image, two brass grommets for secure small-pole mounting, and fade-proof dyes that hold up under constant sun, salt spray, and highway wind.

12x18 Inch 200D Nylon Bleed-Through Reverse Brass Grommets Boat & Car Ready Fade Proof Colors

Show your Delaware pride wherever you go with the PromoPatriot Delaware State Boat Flag — a compact 12x18 inch flag built specifically for the small-pole, high-vibration environments that full-size flags weren't designed for. Boat antenna mounts, car window clips, and golf cart flagstaffs all demand a smaller, lighter flag that won't drag, tangle, or tear loose at speed, and that's exactly what this size delivers. Despite the compact dimensions, it's built from the same 200 Denier (200D) Nylon used across our full-size flagpole flags, not a thinner novelty fabric.

This flag uses a single-sided print with a 100% bleed-through reverse image on the back. The design is printed once on the front with dye that fully saturates through the nylon weave, so the back shows a clear, vivid mirror image rather than a faded or blank reverse. This is the standard construction for small boat and car flags because it keeps the flag lightweight enough to flutter and snap crisply in the wind generated by boat speed or highway driving, rather than hanging stiff the way a heavier double-sided flag would at this size.

Despite its small size, this flag includes two solid brass grommets set into a reinforced header, sized appropriately for boat rail clips, car flag pole mounts, and small staff hardware. The edges are finished with tight lock-stitching to resist the rapid, repeated flutter this flag experiences at boat speed or highway velocity — a stress pattern very different from a stationary flagpole flag, and one that causes cheap unstitched mini-flags to shred within days.

Why Boat & Car Flags Need Different Construction Than Flagpole Flags

A flag mounted on a moving boat or vehicle experiences constant, rapid flutter from wind generated by speed, not just ambient breeze — often far more cycles of stress per minute than a stationary flagpole flag ever sees. Salt spray on boats and road grime on vehicles also accelerate fading and fabric breakdown if the material and dyes aren't built for it. That's why this 12x18 flag uses the same 200D nylon and fade-proof dye process as our larger outdoor flags rather than a cheap printed polyester novelty flag — it's sized for small mounts but engineered for the harsher, faster-cycling conditions of marine and automotive use.

Perfect For

Boats & Antennas

Sized for boat rail mounts and antenna flagpoles, holding up against salt spray and constant wind flutter on the water.

Cars & Trucks

Fits standard window-clip car flag poles, built to withstand highway-speed wind without fraying or fading quickly.

Golf Carts & Bikes

Compact and light enough for golf cart flag poles and bicycle flag staffs, adding visibility and state pride on the move.

Desk & Small Indoor Display

A great compact size for desktop flag stands, small offices, or display alongside other state and novelty flags.

Mounting Your 12x18 Boat or Car Flag — 3 Steps

Unpack & Smooth

Unfold and smooth out shipping creases by hand, or give it a quick low-heat steam if needed. The compact nylon relaxes faster than larger flags.

Attach to Grommets

Clip your boat rail mount, car window pole, or small flagstaff hardware through the two brass grommets, making sure clips are fully closed.

Mount & Check Clearance

Secure the mount to your boat rail, car window, or cart pole. Confirm the flag has room to flutter freely without catching on rigging, mirrors, or nearby obstructions.

⚠ High-Speed & Salt Spray Care Advisory

Boat and car flags experience far more flutter cycles per outing than a stationary flagpole flag, plus added exposure to salt spray or highway grime. Rinse the flag with fresh water after marine use to remove salt residue, and remove or stow the flag during severe weather, car washes, or extended highway travel at very high speeds to maximize its lifespan.

Delaware's Flag — The First State's Colonial Colors

Delaware's state flag is one of the most visually distinctive in the United States. The colonial buff diamond on a colonial blue field represents the uniform colors of the Delaware Regiment during the Revolutionary War — the unit that earned the nickname "The Blue Hen's Chickens." Inside the diamond is the state coat of arms, representing Delaware's colonial economy. Below the arms is the date December 7, 1787 — the exact day Delaware became the first state to ratify the U.S. Constitution. Even at compact 12x18 scale, every detail prints with crisp, vivid clarity.

12x18 Inch Delaware State Flag — compact format built for boat rails, car windows, golf carts, and small flagstaffs.
200D Premium Nylon — the same durable fabric used in our full-size flagpole flags, not a thin novelty material.
Single-Sided Print with 100% Bleed-Through Reverse — dye fully penetrates the nylon for a vivid mirror image on the back.
Solid Brass Grommets — two rust-resistant grommets sized for small-pole mounts, boat rail clips, and car flag hardware.
Reinforced Stitched Edges — tight lock-stitching built to handle rapid flutter from boat speed or highway wind.
Fade Proof & UV Resistant — sharp colonial buff and blue colors that resist salt spray, road grime, and sun bleaching.

Product Name	PromoPatriot Delaware State Boat Flag 12x18 Inch — Single Sided with Bleed-Through Reverse, 200D Nylon, Brass Grommets
State	Delaware (DE)
Flag Design	Official Delaware State Flag — Colonial Buff Diamond on Colonial Blue Field with Coat of Arms and Dec 7, 1787
Dimensions	12 x 18 Inches
Material	Premium 200 Denier (200D) Nylon
Print Type	Single-Sided Print with 100% Bleed-Through Reverse (vivid mirror image on back)
Mounting	Reinforced header with 2 solid brass grommets
Edge Finishing	Tight lock stitching engineered for high-flutter marine and automotive use
Recommended Use	Boat Rails/Antennas, Car & Truck Window Mounts, Golf Carts, Bicycles, Small Flagstaffs, Desk Display
Brand	PromoPatriot

Standard Shipping

Standard delivery 3–5 business days. Expedited (1–2 days) and overnight options available at checkout. Orders placed before 2 PM EST on weekdays ship same day.
30-Day Hassle-Free Returns

Return within 30 days in unused original condition for a full refund. Prepaid return label provided. Manufacturing defects in nylon, stitching, or grommets replaced free within 30 days.
Quality Guarantee

Every PromoPatriot flag is backed against manufacturing defects in color fastness, fabric construction, and grommet integrity. If something isn't right out of the box, we make it right.

Florida State Motorcycle Flag 6×9 inch – Double-Layered Printed 2-Ply Durable Knitted Polyester – 0.75 inch Sleeve- Fits on 3/8″ Mount Pole

Name: Purchase Florida 6x9" Motorcycle Flag – Strong & Long-Lasting
Price: 10.00 USD
Availability: InStock

$10.00

Compare

Add to wishlist

★ Delaware State Boat Flag · 12x18 In · 200D Nylon · Brass Grommets · Fade Proof

Flag Features

Compact marine and automotive flag construction — durable 200D nylon, vivid bleed-through print, and reinforced edges built for boats, cars, and small mounts.

Compact Format

12x18 Inch Size

Sized specifically for boat rails, car window mounts, golf cart poles, and small flagstaffs where full-size flags won't fit or perform well.

Real Durability

200D Nylon Fabric

The same premium nylon used in our full-size outdoor flags, not a thin novelty material — built to handle salt spray and highway wind.

Full Penetration

100% Bleed-Through Print

Single-sided print with dye that fully penetrates the nylon, giving the reverse side a sharp, vivid mirror image instead of a faded back.

Rust-Proof

Solid Brass Grommets

Two brass grommets sized for boat rail clips, car flag poles, and small staff hardware — secure and tear-resistant at speed.

Flutter Ready

Reinforced Stitched Edges

Tight lock-stitching engineered for the rapid, repeated flutter of boat-speed and highway wind, not just gentle ambient breeze.

UV & Salt Resistant

Fade Proof Colors

Treated dyes resist salt spray, road grime, and sun bleaching, keeping the First State's colonial buff and blue sharp at the dock or on the road.

Why Choose Us

200D Nylon, Brass Grommets, Bleed-Through Print — A 12x18 Flag Built for Boats, Cars, and Constant Flutter

Most cheap mini flags are made from thin, printed polyester that looks fine on the shelf but shreds within days of real boat speed or highway wind. A flag mounted on a moving vehicle or vessel flutters constantly, not occasionally — that's a fundamentally different stress pattern than a flagpole flag, and it demands real fabric and real stitching, not a novelty print.

PromoPatriot 200D Nylon Boat/Car Flag vs. Standard Mini Flags

This Product

12x18 In · 200D Nylon · Stitched Edges

200D Nylon — real outdoor-grade fabric, not thin novelty material
Bleed-through print — vivid mirror image on back, not a blank reverse
Brass grommets — solid hardware sized for boat and car mounts
Stitched edges — built for constant flutter at boat or highway speed
Fade proof colors — resists salt spray, road grime, and UV bleaching
Flutters cleanly — light enough to snap crisply rather than hang stiff

Standard Mini Flag

Thin Polyester · Unfinished Edges · Basic Print

Thin printed polyester — tears within days of constant flutter
Blank or dull back — single-layer print with no reverse visibility
Plastic or thin grommets — pull out under repeated wind stress
Raw or unfinished edges — frays almost immediately at speed
Untreated ink — fades fast from sun and salt exposure
Common failure point — most mini flags are not built for real use

Feature	PromoPatriot 12x18 Boat/Car Flag	Standard Mini Flag
Material Durability	200D Nylon — Built for Salt Spray & Road Wind	Thin Polyester — Tears Under Constant Flutter
Flutter Performance	Snaps cleanly at boat or highway speed	Frays quickly under high-cycle wind stress
Color Fastness	UV & Salt Resistant Dyes — Sharp Colors Hold	Untreated ink fades within weeks of use
Edge Durability	Tight lock stitching for high-flutter conditions	Raw or loose edges fray almost immediately
Mounting Hardware	Solid Brass Grommets for Boat/Car Hardware	Cheap plastic grommets that pull out fast

30-Day Satisfaction

Return within 30 days for a full refund if you aren't completely satisfied.

Fast Dispatch

Orders placed before 2 PM EST ship the very same day.

Fade Proof Guarantee

Our advanced UV and salt resistant dyes keep your Delaware flag vibrant on the water or the road.

Care & Maintenance

Maximizing the lifespan of your 200D Nylon 12x18 boat or car flag

Rinse After Marine Use

Salt spray accelerates fading and fabric wear faster than fresh water exposure. After a day on the boat, give the flag a quick rinse with fresh water and let it air dry before storing or folding.
Remove Before Car Washes

Automated car washes can snag, tear, or stain a window-mounted flag. Remove the flag and pole before going through a wash, then re-clip it afterward.
Storage Between Outings

If you're not flying the flag daily, unclip it and store it dry and folded rather than leaving it mounted in direct sun and constant wind, which extends fade-proof performance over the season.
Check Grommets Periodically

Boat and car mounts vibrate constantly. Periodically check that the brass grommets and clip hardware are still secure, since loosened hardware is the most common cause of a lost mini flag.

Need a larger flag for a porch or residential flagpole instead? Check out our Delaware State Flag 3x5 Ft. Made with the same premium 200D nylon and brass hardware, sized for standard outdoor flagpole display.

Shop Delaware 3x5 Ft Flag →

12x18Inches

Compact profile built for boat rails, car window mounts, golf carts, bikes, and small flagstaffs where full-size flags don't fit.

200DNylon

The same durable nylon used in our full-size outdoor flags, built to handle salt spray, road grime, and constant flutter.

2Brass Grommets

Solid, rust-proof brass grommets sized for boat rail clips, car flag poles, and small-staff mounting hardware.

FadeProof

UV and salt resistant dyes lock in the First State's colonial buff and blue, keeping colors sharp at the dock or on the road.

Frequently Asked Questions

Everything you need to know about the PromoPatriot Delaware 12x18 Inch Boat & Car Flag

What does "Single Sided with 100% Bleed-Through" mean?

It means the design is printed once on the front using a dye-sublimation process that fully penetrates the nylon weave, so the reverse side shows a sharp, vivid mirror image of the front design rather than a blank or faded back. This is the standard construction for boat and car flags because it keeps the flag light and breathable enough to flutter cleanly in fast-moving air, unlike a heavier double-sided flag which would feel stiff and sluggish at this small size.

Will this flag hold up at boat speed or on the highway?

Yes. Unlike thin novelty mini flags, this 12x18 flag is built from the same 200D nylon used in our full-size flagpole flags, with reinforced lock-stitched edges. Boat and car flags experience constant, rapid flutter rather than occasional breeze, and this construction is specifically chosen to withstand that higher-cycle stress without quickly fraying or tearing the way cheaper printed polyester mini flags do.

Does this flag work for both boats and cars, or do I need different versions?

The same flag works for both. It mounts through its two brass grommets, which are compatible with standard boat rail flag mounts, car window flag poles, golf cart staffs, and small bicycle flag poles. You'll need the appropriate mount or pole hardware for your specific use (sold separately in most cases), but the flag itself is built to perform well across all of these applications.

How do I prevent salt water from damaging the flag?

Salt residue left to dry on the fabric can accelerate fading and fiber breakdown over time. After boating in saltwater, rinse the flag with fresh water and allow it to air dry before storing or refolding it. This simple step, combined with the flag's UV and fade-resistant dyes, will meaningfully extend its usable life compared to never rinsing it.

Can I wash this flag in a washing machine?

We don't recommend machine washing. The agitation can stress the brass grommets and loosen the stitched hem even at this compact size. If the flag picks up dirt or grime, simply hand wash it in a sink with cool water and a mild detergent, then air dry fully before remounting it on your boat, car, or cart.

What is your return policy?

You can return the flag within 30 days in original, unused condition for a full refund — a prepaid return label will be provided. If the flag suffers from a manufacturing defect (such as an improperly set grommet, misprinted colors, or unraveled stitching out of the box), we will replace it free of charge within 30 days. Normal wear from regular boat or car use, such as gradual fading after extended exposure, is the expected lifecycle of an outdoor flag and is not covered as a manufacturing defect.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Florida State Motorcycle Flag 6×9 inch – Double-Layered Printed 2-Ply Durable Knitted Polyester – 0.75 inch Sleeve- Fits on 3/8″ Mount Pole”